Palco Industrial Marking & Labeling Palco Industrial Marking & Labeling bottom logo cmyk swatches


Join Our Email List?
Benchmark Email
Powered by
Benchmark Email

Envelope Imager 3.0

Envelope Imager 3.0 Rena Systems Logo

Envelope Printer

The RENA Systems Envelope Imager 3.0 is a heavy-duty, full-featured addressing system designed for high performance with powerful processing, precision parts and all metal construction.

Print addresses, attention lines, postal barcodes, return addresses and indicia in a single run. You have four different print qualities. Fully independent print heads can overlap into two printing areas. This system will meet the demanding load of your business for years to come.

Key Features


Print Technology Thermal Inkjet, Six HP 45A-Style High Capacity Cartridges
Address Speed(9 Lines on 4"x6" Postcard)(9 Lines on #10 Envelopes)
34,000 /hour at 150 dpi 26,000 /hour at 150 dpi
25,000 /hour at 200 dpi19,000 /hour at 200 dpi
20,000 /hour at 300 dpi15,000 /hour at 300 dpi
11,500 /hour at 600 dpi7,200 /hour at 600 dpi
Print Quality (Dots Per Inch) DescriptionDots Per InchResolution
High Quality 600 dpi 600x 600 dpi
Letter Quality 300 dpi 600 x 300 dpi
Standard Quality 200 dpi 600 x 200 dpi
Hi-Speed Quality 150 dpi 600 x 150 dpi
Image Area 4” X 17” w/ 12” Vertical Range
Print Head Split 3 Pen Stitched + 3 Pen Stitched Design
Processor AMD TigerSharc 100 MHz DSP with Dual Calculation Technology
Memory 64 MB RAM
Fonts All TrueType fonts available on PC
Print Orientation Normal and Reverse
Counters One operator resettable job counter, one permanent lifetime counter
Ink Monitor Visible on Display
Prints Allows printing of graphics, logos, and barcodes
Material Size Minimum (W x L): 3" x 5"    Maximum (W x L): 13.5" x 17"
Material Thickness Up to 3/8”
Feeder-Capacity Up to 750 #10 Envelopes
Software Windows Printer Drivers for Windows 98, 2000, NT, ME, and XP
PC Interface Parallel and USB 2.0
Diagnostics Resident in firmware
Firmware Update Flash PROM update
Duty Cycle 120 million addresses total or 2,000,000 per month over a 5-year life cycle
Dimensions 25” H x 28” L x 22” W
Weight 80 lbs
Electrical 115VAC or 240VAC 50/60 Hz
Options Conveyor/Stacker/Dryer, Drop Tray
MADE in the USA

download arrow Download

PDF LogoImager 3.0 Datasheet [.pdf - 3.4 mb]

Contact us today and talk to a knowledgeable representative to answer any questions, or to place an order.